A Ellery company - serving Las Vegas, NV
A junior ADU suite with its own kitchen and door
Cover · Las Vegas

Cover Junior ADU Conversion in Las Vegas, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Las Vegas

Cover Junior ADU Conversion: The Las Vegas Owner’s Guide

We install and service Cover-compatible junior ADU conversion systems in Las Vegas, and most full conversions land in the $48,000 – $92,000 range depending on whether you’re finishing an existing garage bay or converting raw space in the main house. The exact price depends on the unit, the site, and the finish level, but every project starts with a written price. Owners usually find out something is wrong the day the Cover panel set arrives and the rough opening doesn’t match, or the first monsoon season ends and the conversion’s seals are letting desert dust in.

Call (866) 779-3194

Below is the part-by-part reality of converting a Cover system in Las Vegas specifically, including what fails first here and why.

Key Takeaways

  • Cover junior ADU conversions in Las Vegas typically run $48,000 – $92,000 all-in, drawings through inspection.
  • Cover’s prefab panels are factory-engineered to one spec; retrofit conversions need the opening framed to that spec, not the other way around.
  • Las Vegas summers above 110°F and the annual monsoon swing are the two conditions that wear conversion components fastest.
  • Every project we take on is quoted in writing before any work starts, per Haven Standard Clause 1.

Which Cover Models This Applies To

An efficiency kitchen in a junior ADU

Cover builds its junior ADU conversions around a panelized wall and roof system, and the interface between that system and your existing structure is where the conversion lives. The part that fails most often is the transition assembly: the threshold plate, flashing kit, and penetration seals bundled for the specific Cover panel series you ordered.

You identify the right assembly three ways. First, the spec label inside the panel’s edge channel lists the panel series and revision. Second, measure the rough opening at the threshold and at the header – Cover’s tolerances are tight, and a 1/4-inch drift is enough to reject a threshold plate. Third, match the flashing kit to the panel’s factory seam pattern, which changed between Cover’s earlier and later panel series. OEM is the safe default for anything structural or weather-sealed. Quality aftermarket equivalents exist for trim, thresholds, and gaskets, and we specify aftermarket there when it holds the same rated performance for less money.

We work independently of Cover. We don’t build or sell Cover systems, but we install and coordinate them daily, alongside Abodu and Dvele systems, and we know where the fit tolerances bite.

Signs Your Cover Junior ADU Conversion Is Failing

Owners usually notice the problem well before it becomes a leak. Here’s what the failure looks like at each stage:

  • Dust intrusion along the base of the panel seams. The threshold gasket has compressed and lost its spring, common after two or three Las Vegas summers. Replacement is the fix, not caulk.
  • Water staining at the flashing line after a monsoon. The flashing kit was installed to the wrong panel revision or lifted at one corner. This one usually shows up on the first hard rain of the season.
  • Visible gaps at the rough opening corners. The opening was framed to the nominal dimension, not to the panel spec. Framing has to be corrected before a new seal holds.
  • Panel seams appearing to shift or open. Fastener backing has loosened with thermal cycling, the 40°F-plus swing between a January night and a July afternoon. This needs inspection, not a patch.
  • Interior condensation on the panel face in winter. Vapor barrier continuity was broken during the conversion. The fix is re-establishing the barrier, not adding a dehumidifier.

If you’re seeing any of these, call us and we’ll come look. Under our documented photo record commitment, you get photos of what we found, not a verbal summary.

Replacement Cost & What’s Included

The private side entrance of a junior ADU

Here is what the work runs in Las Vegas, installed:

  • Threshold plate and gasket replacement: $650 – $1,400, parts and labor.
  • Flashing kit replacement and re-seal at the panel transition: $1,200 – $2,800.
  • Rough opening reframing to Cover panel spec: $2,400 – $6,500, depending on the amount of framing correction.
  • Vapor barrier re-establishment: $900 – $2,200.
  • Full conversion re-seal and component audit: $3,800 – $9,200 for older installations.

The range depends on access, whether the original framing was correct, and whether the panel revision matches the kit you have. Every quote is written and fixed before work starts – no change orders once we’re in, per Haven Standard Clause 5. Workmanship carries our 365-Day Done Right Promise, in writing.

DIY or Call Us?

You can safely check a few things yourself. Run a hand along the threshold gasket and feel for compression. Look at the flashing corner after a rain for staining. Check that the panel seam label matches the kit label. Those checks cost nothing and tell you a lot.

Where DIY goes wrong is at the flashing and panel seam – it’s the junction where wind-driven rain and dust arrive at the same time, and a mis-sealed corner traps moisture inside the wall assembly before you see evidence of it. Reframing a rough opening while the panel set is attached to it isn’t a homeowner job; it’s structural and gets inspected. And a vapor barrier that’s patched rather than re-established will show up as condensation and, eventually, rot.

If a check turns up anything, call (866) 779-3194. A live person answers, around the clock, and the first visit is a free estimate.

FAQs

The sitting area and efficiency kitchen of a junior ADU

Small homes that live large

Vaulted ceilings, compact kitchens and private decks: the details that make an ADU feel like a home.

Read our ADU guides
A bedroom and desk inside a converted garageA new two-story ADU over a garageAn attached garage converted into living spaceA compact kitchen inside a new ADUA kitchenette inside a converted garageA new modern ADU with wood cladding

Explore more ADU services

Every build below starts the same way: a free site visit and a written price.

Getting started with Ellery in Las Vegas

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a backyard ADU site with the homeowner

Free site visit

A project lead walks the lot with you, checks what it allows and hands you a written, line-item price. No obligation.

Book a site visit
A building crew carrying lumber to a backyard ADU site

Your Las Vegas team

A local vetted partner works across Las Vegas and the towns around it, to the same written standard as every Ellery job.

Areas we serve
A worker protecting the lawn before an ADU build starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need ADU help nationwide? Licensed & insured · free written estimates
Call (866) 779-3194
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Ellery ADU Studio Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch