Boxabl Junior ADU Conversion: The Las Vegas Owner’s Guide
Boxabl-compatible junior ADU conversion work in Las Vegas typically runs $6,500-$19,000 installed, depending on whether you’re converting a garage bay, a Casita shell, or an existing interior room, and most conversions are scheduled within two to three weeks of a signed written scope. Boxabl doesn’t sell a separate “junior ADU conversion” kit, so this work is almost always a design-build scope that adapts the unit’s shell to a permitted JADU: egress, wet-wall rough-in, electrical, insulation, and finish. Owners usually discover the problem the same way. The studio conversion they bought or inherited was never permitted for the added kitchenette or bathroom, and the county flags it at resale, refinance, or the first neighbor complaint.
Key Takeaways
- Boxabl doesn’t manufacture a standalone JADU conversion kit, so every conversion is a permitted design-build scope.
- Clark County and City of Las Vegas treat a JADU as a distinct permit type with its own egress, ceiling-height, and wet-wall rules.
- Written price before any work starts, per Haven Standard Clause 1. A documented photo record on every visit.
- Under Clause 5 (No Surprises), the scope on a conversion is locked at signing.
Which Boxabl Models This Applies To

Boxabl’s Casita is the unit most Las Vegas owners are converting, usually a single-module shell delivered as a backyard studio, guest unit, or pool house. The Casita is built to a nominal 19-by-19 footprint on a steel chassis with a folding wall system, and the interior arrives as a largely open shell. That open shell is the whole reason a junior ADU conversion is a real project and not a furniture assembly. A junior ADU needs a full bathroom, a cooking appliance, a dedicated 240-volt circuit for the range or dryer, and a sleeping area that meets egress rules. None of that ships in a stock Casita.
To know what you’re working with, look at the data plate inside the unit near the entry, not at the sticker on the exterior panel. The plate lists the module serial, the build date, and the electrical service rating. Read that rating before anything else: a Casita wired for a 50-amp feed and a 100-amp feed look identical from the outside, and the difference decides whether you can run an electric range and a mini-split on the same panel. Owners who skip this step are the ones who discover at inspection that the service is undersized.
On the OEM-versus-aftermarket question: Boxabl does not sell a consumer JADU conversion kit, so “OEM” doesn’t really apply the way it does for a car part. What you’re matching is the shell. Abodu, Cover, and Dvele units also come through Las Vegas, and each has its own structural and utility conventions, which is why we confirm the shell before quoting. Ellery ADU Studio Las Vegas is an independent design-build studio. We are not affiliated with Boxabl, and we don’t claim to be. We specify and coordinate the conversion inside a single written contract.
Signs Your Boxabl Junior ADU Conversion Is Failing
Most failed conversions in Las Vegas fail for the same five reasons. Here’s what each one actually means.
- Permit denied or flagged at resale. The most common failure isn’t physical, it’s paperwork. A prior owner added a bathroom or kitchenette without a JADU permit, and the county discovers it at sale or refinance. The underlying cause is that the conversion scope was never drawn and permitted as a JADU in the first place.
- Moisture at the wet wall or ceiling seams. Las Vegas gets roughly 4 inches of rain a year, but that rain arrives in sudden monsoon bursts that overwhelm undersized flashing. If the bathroom or kitchenette was roughed in without proper vapor control at the roof penetration, you’ll see staining at the ceiling seam within a season or two.
- Tripped breakers when the range and AC run together. A Casita fed on a 50-amp service can’t carry a 240-volt range plus a mini-split plus a water heater. The breaker trips because the service rating was never upgraded for JADU loads, which is a design oversight, not a bad breaker.
- Egress window that doesn’t open to the required clear opening. Sleeping rooms need a window with a clear opening large enough for escape. A conversion that repurposed a fixed picture window fails that check every time. It’s caught at inspection and it’s a real safety item.
- Uneven floor or door that won’t latch. In Las Vegas, the summer heat drives steel chassis expansion, and a conversion built on a slab without a proper transition can rack slightly. A door that latched in spring and won’t close in July is a sign the conversion wasn’t anchored correctly to the shell.
Replacement Cost & What’s Included

Junior ADU conversion scopes in Las Vegas run $6,500-$19,000 all-in, drawings through final inspection, depending on what you already have. Here’s how the range breaks down:
- Permit set and JADU drawings: $2,200-$4,800. This is the core deliverable, not an add-on.
- Wet-wall rough-in and bath finish: $4,000-$8,500, depending on whether you’re tapping an existing drain line or running a new one.
- Electrical service upgrade and dedicated circuits: $1,800-$3,600, driven almost entirely by the service rating on that data plate.
- Egress window, insulation, and interior finish: $1,500-$3,200.
What drives the range is the shell you start from, the service rating, and whether any prior unpermitted work has to be corrected before the new permit can pass. Every project is quoted with a written price before any work begins (Haven Standard, Clause 1), with a written scope locked at signing (Clause 5, No Surprises). You get a documented photo record on every visit. Under the 365-Day Done Right Promise, if the finished conversion isn’t built to the permitted drawings, we make it right, in writing, before the project starts.
DIY or Call Us?
Some of this you can safely check yourself. Open and close every window to confirm the egress one opens fully. Read the electrical service rating on the data plate. Look at the ceiling seams and wet wall for staining. Note any breaker that trips when two large loads run together. Write down the module serial number. That gives you the facts to quote accurately.
What we don’t recommend is modifying the electrical service, the wet wall, or the egress opening yourself. These are the exact items that fail inspection and, more importantly, the items that fail in a way that matters – a fire, a flooded unit, or an egress window that won’t open when you need it. If the conversion was never permitted, the fix is drawings and a permit, not a weekend of framing. Call (866) 779-3194 for a free estimate, and if you already have a written quote from someone else, we’ll give you a free second opinion on it before you commit.
FAQs

A properly permitted and built conversion is designed to last the life of the shell, 30-plus years. The parts that fail first aren’t structural: they’re the sealant and flashing at the roof penetrations (budget to reseal every 5-7 years in Las Vegas) and the wet-wall caulk line (every 3-5 years). Get the permit right and the build right and the conversion outlasts the discussion. Call (866) 779-3194 for a free estimate.
In most cases yes, if the shell is sound and the failure is permitting or electrical service. A JADU that was added without a permit usually needs a permit set drawn and the work brought up to code, not a demolition and rebuild. Structural or moisture damage is the case where the scope grows. Call (866) 779-3194 and we’ll tell you honestly which situation you’re in before you commit to anything.
A typical junior ADU conversion runs 4-8 weeks from permit issuance to final inspection, depending on how much needs to be corrected. The permit drawing phase adds 3-6 weeks before that, because Clark County and City of Las Vegas review JADU plans separately from standard residential permits. Nobody builds this in a day, and a company that tells you otherwise is selling you an unpermitted result. Call (866) 779-3194 to schedule your free estimate.
We don’t stock Boxabl parts, and we don’t claim to. The conversion scope is built from standard building materials, fixtures, and systems that we specify by name in your written scope, sourced through licensed supply channels, and documented on every visit. Boxabl’s shell is the one part that isn’t ours to replace, which is why we confirm the module serial and data plate before quoting. Call (866) 779-3194 for a free estimate.
Written by the team at Ellery ADU Studio Las Vegas, serving Las Vegas and nearby areas.












