Cover New Detached ADU: The Las Vegas Owner’s Guide
If a component on your Cover backyard unit has failed, a Cover-compatible replacement for a new detached ADU in Las Vegas typically runs $280 to $1,150 installed, depending on which part and which series you own. We quote a written price before any work begins and confirm the exact part number against your model before we order. Most owners discover the failure in one of two ways: a slow leak shows up as a water stain on the interior wall during monsoon season, or a door that used to close flush now catches on the frame by a quarter inch. Both point to the same handful of wear parts. We install Cover-compatible components as an independent service provider, not affiliated with Cover.
Which Cover Models This Applies To

Cover builds its detached units around a few core series, and the part you need depends on both the series and the year it shipped. The panel-related parts (door seals, threshold plates, glazing gaskets) differ between the smaller studio footprint and the larger one-bedroom model, and the spec changes matter: a threshold plate spec’d for the 10-foot opening will not seat on the 12-foot version without modification. Before ordering, we identify your unit from the data plate on the interior wall – it lists the model code, build year, and the sub-assembly revision – then measure the opening ourselves. We never guess from a photo.
On the OEM-versus-aftermarket question, Cover’s own parts are the safest match for anything structural or weather-sealed, because the tolerances are tight and a gasket that’s 2mm off will leak in a Las Vegas downpour. For trim, hardware, and fasteners, a quality aftermarket equivalent performs the same and costs less. We tell you which side of that line each part falls on, in writing, so you’re not paying OEM prices for a screw.
Signs Your Cover New Detached ADU Is Failing
These are the failures we see most often on Cover units across the Las Vegas valley:
- Water staining at the base of the wall or floor seam. The door threshold seal has compressed or cracked after a summer of 110-degree heat, letting monsoon rain wick in. Left alone, it rots the subfloor edge.
- A door that drags, sticks, or won’t latch flush. The hinge or roller hardware has worn, or the frame has shifted slightly on its foundation. This is a hardware replacement, not a structural problem, in most cases.
- Condensation or drafts along the glazing edge. The window gasket has lost its seal, common when a unit faces full afternoon sun in the southwest valley. It shows up as fogging between panes or a cold spot in winter.
- Visible cracks or crazing in a panel or trim piece. UV exposure and daily temperature swings – often 40 degrees between day and night – stress the finish. Surface cracking is cosmetic; a crack through the panel is not.
- A grinding or scraping sound on opening. A roller or track component has worn or debris has built up. Usually a straight hardware swap once we confirm the track itself is sound.
If you see two or more of these together, call us rather than waiting. In Las Vegas, a small seal failure after the first monsoon often becomes a floor repair by the next one.
Replacement Cost & What’s Included

Installed pricing for Cover-compatible parts on a new detached ADU in Las Vegas, parts and labor together:
| Part | Installed range |
|---|---|
| Door threshold seal / weather gasket | $280 – $480 |
| Glazing gasket (per window) | $320 – $540 |
| Hinge / roller hardware set | $350 – $620 |
| Panel or trim section replacement | $650 – $1,150 |
The range is driven by series, opening size, and whether the old part comes out clean or fights you. Every quote is written before we touch anything (Haven Standard, Clause 1), so the number you approve is the number you pay. The work carries our 365-Day Done Right Promise – if it’s not done right, we make it right, in writing.
DIY or Call Us?
You can safely check some things yourself: wipe down a seal to see if it’s cracked, confirm the model code on the data plate, and watch where water pools after a storm. What you shouldn’t do is force a seized hinge, pry a glazing gasket out of a sealed frame, or re-seal a threshold with the wrong compound – a bad seal job in Las Vegas heat fails within a season and can void the OEM warranty on the panel. The parts are also specific enough that the wrong one won’t seat, and you’ll have paid for it twice. Call us at (866) 779-3194 and we’ll confirm the part, quote a written price, and book the swap. A live person answers around the clock, and our technicians have up to 11 years of experience on these systems.
FAQs

Seals and gaskets typically last 5 to 8 years in the Las Vegas climate; hardware lasts 7 to 10. The heat and UV shorten seal life compared to cooler markets, so inspect annually. Call (866) 779-3194 for a written quote when you spot the first sign.
Sometimes. A hinge can often be re-aligned, and a small seal nick can be patched, but a cracked gasket or worn roller is a replacement. We tell you which it is after we’ve inspected. Call (866) 779-3194 – estimates are free.
Most single-part replacements are a two- to four-hour visit once the part is on hand. Panel or trim work can run longer. Call (866) 779-3194 and we’ll give you a written time and price before booking.
We confirm the exact model and revision from your data plate, then source the correct OEM or quality aftermarket equivalent from the manufacturer or an approved supplier. We don’t carry stock ourselves. Call (866) 779-3194 to start the match.
Written by the team at Ellery ADU Studio Las Vegas, serving Las Vegas and nearby areas.












