Why Las Vegas Homeowners Choose Cover ADU
We provide independent Cover ADU service in Las Vegas: site assessment, HOA and zoning compliance, garage conversion work, and repair of panelized Cover shells that were assembled by someone else. What makes our Cover work different is that we handle the panel connections, the foundation interface, and the Clark County paperwork under one contract at one written price. We are an independent studio. We are not affiliated with, authorized by, or acting as an agent of Cover, and we don’t sell their units.
Cover builds a panelized steel-frame system, not a stick-built box. That single fact changes how an ADU in Las Vegas has to be sited, anchored, wired, and reviewed by an HOA. We know the Studio, the One-Bedroom, the Two-Bedroom, and the garage conversion kit at the level of panel modules and connection schedules. Call (866) 779-3194 and a live person answers, any hour.
Why Trust Ellery ADU Studio Las Vegas for Your Cover ADU?

Our technicians have up to 11 years of experience, and that experience is concentrated on modular and prefab systems rather than site-built framing. A Cover shell doesn’t fail the way a wood-frame ADU fails. It fails at the seams, at the base track, and at the point where a factory-built panel meets a slab somebody else poured. Our crews have taken apart enough of those connections to know which ones are within tolerance and which ones need to come off.
Parts matter as much as labor. On Cover work we specify Cover-supplied replacement panels and connection hardware wherever they’re available, because dimensional fit is the whole point of a panelized system. For connectors, flashing, and cladding fasteners we specify corrosion-rated equivalents – stainless or hot-dip galvanized – that meet or exceed Cover’s spec. In Las Vegas’s alkaline soils and monsoon moisture, a galvanized bracket that would last thirty years in a dry climate can show surface corrosion in far less.
Nothing we do is designed to put your warranty at risk. We document what we found and what we did with a photo record on every visit, so when a question comes up later there’s evidence rather than a memory. If a repair touches a structural connection, we work to Cover’s connection schedule and we tell you in writing what that means for the panel’s structural rating. Every project runs under The Haven Standard, starting with Clause 1: a written price before any work begins.
Common Cover ADU Problems We Fix in Las Vegas
- Panel-to-foundation corrosion on exposed slab edges. Las Vegas soils run alkaline, and monsoon-season moisture wicking up a slab edge keeps the base connection damp in cycles. We see this most on units where the slab edge was left unpainted or the base flashing was field-cut short. The fix is rarely the whole panel – usually it’s the anchor hardware, the flashing, and the coating.
- Hairline cracking and water intrusion at factory panel joints. This shows up when a Cover shell is assembled on a site-built stem wall that wasn’t finished to the panel module’s tight elevation tolerance. Wind-driven dust enters first. Monsoon rain follows. Left alone, the joint opens further every season.
- Electrical load calculations failing NV Energy service requirements. A Cover panel arrives with a pre-wired subpanel. Connect that to an older Las Vegas home with a 100-amp main and the load calculation often doesn’t clear – especially once you add the separate HVAC a 110°F summer demands. We run the numbers before anyone touches a breaker.
- HOA design-review rejections. Common in Summerlin and Henderson master-planned villages. Cover’s standard metal cladding and roofline profile don’t always match a community’s approved color or material palette, and the rejection usually arrives after the homeowner has already paid a deposit. We review the CC&Rs and the architectural guidelines before ordering panels.
- Cladding fastener back-out and finish wear. The valley’s hard water and relentless sun are rough on exterior finishes. On older assemblies we find fasteners that have loosened and cladding coatings that have chalked well ahead of schedule. Corrosion-rated replacements and a UV-resistant recoat buy years.
Cover Parts & Our Repair-vs-Replace Approach

We don’t claim to keep Cover parts on hand. Sourcing is per job: we identify the panel module, the series, and the connection detail, then order what fits. Cover-supplied panels and hardware come first whenever they’re available, because a replacement panel that isn’t dimensionally correct is worse than a repaired one. Connectors, flashing, and fasteners get a corrosion-rated aftermarket equivalent that meets or exceeds spec.
The repair-or-replace call is honest and it’s written down. If isolated panels or joints are compromised, we repair the shell. If the structural grid or the foundation interface is compromised past realignment, we say so and recommend replacement, with the reasoning and the photo record attached. A qualified local pro typically re-checks the panel grid elevation, replaces or re-shims the base track, re-flashes the joint, and verifies anchor torque to Cover’s connection schedule, then confirms the fix won’t void the panel’s structural rating. That sequence is standard work for us.
Call (866) 779-3194 and we’ll put a written price in front of you before anything starts. If you already have a written estimate from someone else, we’ll give you a free second opinion on it.
Our Cover Service Process – Step by Step
- 1
Diagnosis. We measure the panel module alignment against Cover’s tolerance, check the base track and anchors, review the electrical service and the load calculation, and pull the HOA and zoning file. You get a documented photo record of what we found.
- 2
Written scope and price. Before any work begins, you receive a written price and a locked scope under Haven Clause 1. No door-side upsells once we’re on site.
- 3
HOA and permit clearance. Where a repair touches the shell’s exterior or a conversion changes occupancy, we confirm the HOA design review and the Clark County or City of Las Vegas permit position first.
- 4
Repair or install. Panels, base track, flashing, connectors, and electrical work are completed to Cover’s connection schedule with corrosion-rated hardware where spec allows.
- 5
Test and document. We verify anchor torque, water tightness at the joints, and the HVAC load against the installed system. Photo record delivered.
- 6
Warranty. Our 365-Day Done Right Promise backs the work in writing. If the finished result isn’t built to the permitted drawings, we make it right.
Cover Products We Service & Install in Las Vegas
We work on the Cover Studio, the one-bedroom panelized steel-frame ADU at roughly 420 square feet, suited to narrow Las Vegas side yards where a detached unit has to fit between block walls. The Cover One-Bedroom runs around 560 square feet and the Cover Two-Bedroom around 780 square feet, the size that most often triggers a service upgrade and a separate HVAC system. We also service and coordinate the Cover garage conversion kit, the panelized retrofit package that turns an existing attached garage into living space without pouring a new foundation.
We Also Service These Brands
Cover is one system among several we work on, and that matters when a Las Vegas lot or HOA rules out a panelized steel-frame unit. We also service and coordinate Abodu and Dvele, alongside other prefab and modular systems. Being fluent across brands means we can tell you when a Cover unit is the right answer and when it isn’t, without a sales quota pushing the call.
FAQs – Cover ADU Service in Las Vegas

No. We’re an independent Cover service provider and we have no affiliation with, authorization from, or agency relationship with Cover. We don’t sell their units. What we do is assess sites, handle HOA and zoning compliance, perform garage conversions, and repair and service Cover shells already in place.
Yes, wherever they’re available. Replacement panels and connection hardware come from Cover when we can source them, because dimensional fit is what keeps a panelized system working. For connectors, flashing, and cladding fasteners we specify corrosion-rated aftermarket equivalents that meet or exceed Cover’s spec – and we tell you in writing which is which on your quote.
Most service calls are a single visit, and repairs involving panel joints or base-track work usually run two to four days depending on parts lead time and whether the HOA has to review an exterior change. We give you the schedule in the written scope before work starts. Call (866) 779-3194 for a written price on your specific job.
We work on the Cover Studio (about 420 square feet, one bedroom), the Cover One-Bedroom (about 560 square feet), the Cover Two-Bedroom (about 780 square feet), and the Cover garage conversion kit or panelized retrofit package. If you’re not sure which one you have, the panel module dimensions and the subpanel layout usually identify it.
Not if the work is done to Cover’s connection schedule, which is how we approach every repair that touches a structural connection. We document the work with a photo record and we tell you in writing, before we start, whether a given repair could affect the panel’s structural rating. Call (866) 779-3194 and we’ll walk through your situation.
Typical Cover service work in Las Vegas runs $450 to $1,800 for a single-visit diagnosis and repair – joint re-flashing, base-track re-shimming, fastener replacement, or a load-calculation correction. Panel replacement or cladding work that requires HOA review and permit clearance usually lands between $3,500 and $12,000. Every one of those figures is paired with a written price before work begins, per Haven Clause 1. Call (866) 779-3194 for an exact number on your unit; estimates are free, and a second opinion on a written estimate you already have costs nothing.
Book Your Cover Service in Las Vegas, NV
Whether you need a seam re-flashed before monsoon season, a load calculation sorted out on an older panel, or a straight answer on whether your Cover shell can be realigned, we’ll give you the finding and the price in writing. Live person answers at (866) 779-3194, day or night. Free second opinion on any written estimate you already hold.
Written by the team at Ellery ADU Studio Las Vegas.












